Bose Pro POWERSPACE P4300A 230V

Bose Pro POWERSPACE P4300A 230V
Bose Pro POWERSPACE P4300A 230V
  • Power Amplifier sono Bose Pro POWERSPACE P4300A 230V
  • Power Amplifier sono Bose Pro POWERSPACE P4300A 230V
Bose Pro POWERSPACE P4300A 230V
Bose Pro POWERSPACE P4300A 230V
Bose Pro
NEW
1390.00inc VAT
Available on demand
Warranty: 24 months
New

Product Information

TECHNICAL DATA
PowerSpace P4300A
versatile power amplifier


Product Description
Ideal for zone-expansion applications, Bose PowerSpace amplifiers
enhance any premium commercial sound installation with clean, reliable
power — and digital connectivity. A Bose AmpLink input allows for
multiple channels of uncompressed, low-latency digital audio from
Bose DSPs via a single Cat 5 cable. The PowerSpace P4300A provides
300 watts per channel and features versatile outputs that give you the
flexibility to deliver full channel power to either low- or high-impedance
loads — without bridging — and even send double power to a single
zone. For premium commercial applications, Bose PowerSpace amplifiers
provide the power and performance to get the job done — pure and
simple.

Applications
Retail stores
Restaurants and bars
Hospitality venues
Conference centers
Schools
Auxiliary zon

Key Features
300 watts per channel and works seamlessly with Bose loudspeakers, DSPs, and controls to create complete
commercial sound systems
Bose AmpLink input for simplified multichannel digital audio connection to compatible DSPs, reducing
terminations and related points of failure
Load-independent outputs deliver full channel power to either low-impedance loads (4-8 Ω) or high-impedance
(70/100V) loads without bridging
I-Share outputs delivers 2x power level into low-impedance (2-4 Ω) or high-impedance (70/100V) loads by
combining the current of both channels
Auto-standby mode saves power when audio signal falls below a set threshold after 20 minutes, then wakes when
audio returns

Technical Specifications
POWER RATING
Amplifier Power 4x 300 W (THD+N < 0.04%, 1 kHz, 4-8 Ω, 70/100V)
I-Share Mode Power 2x 600 W (2-4 Ω, 70/100V) (Each channel pair can be I-Shared)
Gain (Low-Z mode) 32 dB
Gain (70V mode) 35 dB
Gain (100V mode) 38 dB
AUDIO PERFORMANCE
Frequency Response 4-8 Ω: 20 Hz – 20 kHz (+/- 1 dB @ 1 W); 70/100V: Same as 4-8 Ω with 50 Hz high-pass filter
Channel Separation (Crosstalk) > 80 dB @ 1 kHz, > 65 dB @ 20 kHz
Dynamic Range ≥ 100 dBA (at rated power)
Audio Latency <1 ms (any analog or AmpLink input to loudspeaker output)
AUDIO INPUTS ANALOG AMPLINK
Input Channels 4 balanced 8 digital
Connectors 2x 6-pin Euroblock RJ-45 (Input)
Input Impedance 10 kΩ
Maximum Input Level 22 dBu (at 14 dBu sensitivity setting)
Sensitivity -10 dBV / 4dBu / 14 dBu
AUDIO OUTPUTS SPEAKER AMPLINK
Input Channels 4 8 digital
Connectors 8-terminal block RJ-45 (Thru)
INDICATORS AND CONTROLS
Power LED Solid white: Power is on. Blinking white: Unit is in auto standby mode. Solid red: Power supply fault. Blinking Red:
Thermal fault.
Input Signal LED Green: Signal present. Amber: Input is near clipping. Red: Input is clipping.
Output Limit LED Amber: Amplifier limiting an output. Blinking red: Amplifier muted. Solid red: Amplifier or thermal fault.
Controls, Front Panel Power On/Off
Controls, Rear Panel Amplifier mode DIP switches, input sensitivity switch, input select dial, mute, output attenuators
ELECTRICAL
Mains Voltage 100 VAC – 240 VAC (±10%, 50/60 Hz)
AC Power Consumption 120 VAC: 25 W (Auto standby), 570 W (Max) 230 VAC: 25 W (Auto standby), 570 W (Max)
Mains Connector Standard IEC (C14)
Protections Vpeak/Vrms limiters, high temperature, output short, extra high frequency (EHF), excessively low or high AC line
voltage
PHYSICAL
Operational Temperature Range 0 °C to 40 °C
Storage Temperature Range -40 °C to 70 °C
Dimensions (H x W x D) 44 × 483 × 414 mm (1.7 × 19.0 × 16.3 in)
Net Weight 6.6 kg (14.6 lb)
Shipping Weight 8.6 kg (19.0 lb)
Cooling System Microprocessor controlled, variable speed fans, front to back air flow