JBL Pro PRX725

JBL Pro PRX725
JBL Pro PRX725
JBL Pro PRX725
  • Speaker Pro JBL Pro PRX725
  • Speaker Pro JBL Pro PRX725
  • Speaker Pro JBL Pro PRX725
JBL Pro PRX725
JBL Pro PRX725
JBL Pro PRX725
JBL Pro
1155.00inc VAT
Retail price: 1949.00inc VAT
Available on demand
Warranty: 24 months
New

Product Information

Speaker JBL PRX725

If a simple set-up is required and full bandwidth output at high levels is a must, then the PRX725 is most likely the optimum solution. With the same foot print as the PRX715, the dual 15" woofer design creates enough low frequency content to serve most live music or music playback situations. When coupled with a PRX subwoofer (or multiple subwoofers) the system becomes a high volume sound reinforcement solution, perfect for regional tour companies and AV Rental companies looking for a scalable, easy to employ audio solution. We recommend using the PRX718XLF in conjunction with the PRX725 as the extended low frequency capabilities of the subwoofer compliment the frequency response of the PRX725.

For live music, recorded music playback and speech the user has the option of tailoring the EQ. A microphone can be directly connected to the speaker input for quick on-the-fly PA applications.

The PRX725 is a self-powered, lightweight two-way loudspeaker system capable of delivering a very high level of performance over a wide bandwidth. The PRX725 is comprised of two 380 mm (15 in) 275 Differential Drive® woofers, a 2408H-2, 37.5mm (1.5 in) annular polymer diaphragm, neodymium compression driver mounted to a 90° by 50° horn, all driven by a Class-D power amplifier. Sophisticated DSP is at the core of a fully featured input section, providing user selectable system EQ, protection, input sensitivity selection, cross-over functionality, dynamic limiting and discrete component optimization.

All PRX700 cabinets are built from a combination of 25mm (on the top and bottom for added rigidity) and 18mm, strong, light-weight poplar plywood made structurally sound with tongue and groove joints. All PRX700 Series cabinets are protected by JBL’s tour proven DuraFlex™ finish. Grilles are made from dent-resistant 16 gauge steel and handles are made from light-weight glass-filled nylon for added strength and durability. All M10 suspension points are constructed from 14 gauge steel and have been tested with a yield-strength of 1000 lbs. each.

The amplifier input panel offers XLR or ¼ inch jack compatibility and a sensitivity switch provides extra flexibility, making it possible to connect literally any sound source without using a mixer. Signal present and overload lights indicate the system status and assist in setting the optimum level, via the level control knob.


Specifications :

- Power Rating : 1500 W
- Frequency Range (-10 dB) :
- Normal: 42 Hz – 18.5 kHz
- Boost: 40 Hz – 18.5 kHz
- Frequency Response (±3 dB) :
- Normal: 49 Hz – 17 kHz
- Boost: 46 Hz – 17 kHz
- Coverage Pattern : 90° x 50° nominal
- Directivity Index (DI) : 10.4 dB
- Directivity Factor (Q) : 11
- Crossover Frequency : 2.4 kHz
- Maximum SPL :
- Normal: 139 dB
- Boost: 139 dB
- Signal Indicators :
- Limit: Yellow LED indicates peak output has been reached and dsp limiter is acting
- Signal: Green LED indicates signal present
- Power/Standby : Blue indicates system has power and ready to pass audio, Red indicates system has power but is in a power saving mode and will not pass audio.
- Dynamic Control (Input) : dbx Type IV™ limiter circuit
- Input Impedance : 20K Ohms (balanced), 10K Ohms (unbalanced)
- LF Driver : 2 x JBL 275 (15 in) woofer
- HF Driver : 1 x JBL 2408H-2 37.5 mm (1.5 in) annular polymer diaphragm, neodymium compression driver
- Enclosure : Trapezoidal, 18 mm, plywood
- Suspension / Mounting : 8 x M10 Suspension Points, 1 x M10 pull back point
- Transport : 2x integrated handle with injection molded backing cup
- Finish : Obsidian DuraFlex™ finish
- Grille : Powder coated, Obsidian, 16 gauge perforated steel with acoustical transparent black cloth backing.
- Input Connectors : 2 x Balanced XLR / 1/4 inch input, 2 x unbalanced RCA input
- Output Connectors : 1 male XLR balanced output
- Dimensions (H x W x D) : 1070.36 mm x 445.0 mm x 537.97 mm (42.14 in x 17.52 in x 21.18 in)
- Net Weight : 37.19 kg (82 lb.)