Focal Alpha 50 (each)

SOLD TO PAIR ONLY

===========================================================================================================================


Monitoring loudspeaker Focal Alpha 50

Alpha 50, the most compact of the line, is equipped with a 1" (25mm) tweeter and a 5" (13cm) woofer. It features a 20W amplifier for the tweeter and
a 35W amplifier for the woofer, and has a frequency response of 45Hz to 22kHz (+/- 3dB). It is perfectly adapted for confined spaces

Key points :
- Low directivity: keeps the same sound throughout the room
- Damping and rigidity: neutrality, no distortion
- Tonal balance is identical at low and high volumes; low sensitivity to the wall effects
- Connect up to 2 audio sources
- Optimal acoustic integration
- Reduced power consumption


Specifications :

- Type : Monitoring Alpha 50
- Frequency response (+/- 3dB) : 45Hz - 22kHz
- Power : 55W (35W+20W)
- Maximum SPL : 103dB SPL (pic @1m)

Electronic section :
- Inputs Connectors : XLR balanced 10kOhms / RCA unbalanced 10kOhms with sensitivity compensation
- LF amplifier stage 35W, class AB
- HF amplifier stage 20W, class AB
- Standby mode / Standby : After about 30 minutes without using the monitor
- Activation of the monitor : By signal detection >3mV
- Power supply (The voltage can not be modified) : 220-240V (fuse T500mAL/250V) or 100-120V (fuse T1AL/250V)
- Connection : IEC inlet and detachable power cord

User controls :
- Sensitivity : Adjustable, 0 or +6dB
- LF shelving (0 - 300Hz) : Adjustable, +/-6dB
- HF shelving (4.5 - 22kHz) : Adjustable, +/-3dB
- Power ON/OFF : Switch on rear panel
- Standby mode power consumption : < 0,5W
- Indicators : Power ON/OFF LED - Standby LED

Transducers :
- Woofer : 5" (13cm) drive unit - Polyglass cone
- Tweeter : 1" (25mm) drive unit Aluminium inverted dome

Cabinet :
- Construction : 0.6" (15mm) MDF
- Finish : Vinyl and Black painting
- Dimensions with 4 rubber pads (HxWxD) : 12.3x8.7x10.2" (313 x 220 x 258mm)
- Weight : 16.1lb (7.3kg)