Search

Brush in carbon Pro-Ject Clean it Brush in carbon to clean the diamond of your cell....

The dough Pro-Ject Vinyl Clean is a dry cleaning accessory for vinyl records and reading diamond phono cartridges. The use of this vinyl and phono cleaning paste is simple. Just spread it on the surface of a vinyl record and roll it to work. Thanks to its composition, it absorbs the impurities and the dust present on the surface and in the furrows. Pro-Ject Vinyl Clean cleaning paste can also be used to clean the diamond of a phono cell. It will be enough simply to pose i...

Pro-Ject Brush it Carbon-fibre brush Carbon-fibre brush for record cleaning....

Pro-Ject Level it Spirit level for optimum positioning of a turntable...

Pro-Ject Cover It E HOOKS OF PLATINES The Pro-Ject Cover It E is a protective cover compatible with the Pro-Ject Elemental turntable and the Pro-Ject Elemental USB turntable. Made of transparent acrylic, this hood provides effective and stylish protection against dust! CHARACTERISTICS : Design Transparent acrylic Compatibility Pro-Ject Elemental Pro-Ject Elemental USB Overview Internal dimensions (W x...

• Crystal clear acrylic cover for turntables • protect turntable and needle RPM 1 Carbon ou RPM 3 Carbon ou RPM 1.3 Geni...

Specifications: - Mode MM ( moving magnet ) - Input Impedance : 47 Ohms / 120 pF. - Output level: 200 mV / 1 kHz. - Gain : 40 dB - Mode MC ( moving coil) - Input Impedance : 100 Ohm / 120 pF. - Output current 300 mV / 1 kHz . - Gain: 60 dB - Total harmonic distortion: 0.01% - Precision RIAA : < 0.5 dB ( 20 Hz - 20 kHz) - Signal / noise ratio : - MM: 86 dB (94 dB A-weighted ) - MC : 68 dB (75 dB A-weighted ) - Dimensions (W x H...

Electronic stylus balance Pro-Ject Measure it Electronic stylus balance - 4 digit LCD-Display with backlight - Capacity 0 - 5g - Variance ±0,002g - Auto calibration function - Auto off after 120 seconds - Replacement batteries supplied...

Pro-Ject Head Box S2 Black Headphone amplifier Construction : Anti-vibration and anti-interference metal box Aluminum facade Very low noise components Separate power supply Small footprint Two headphone outputs that can be used simultaneously Measures : Amplification Power: 725 mW (under 32 ohms) Signal-to-noise ratio: -110 dBV Harmonic distortion + noise (THD + N): ...

MM/MC Phono preamp Pro-Ject Phono Box USB Phono Box USB: Top specialist for listening & recording of vinyl records! Phono Box USB is an ideal phono preamplifier for both your hifi system and vinyl recording to PC or Mac. MM and MC cartridges will be welcome. The analogue output of Phono Box USB can easily be connected to a line-input (AUX,...) of your hifi and digitally via USB to your computer. Both outputs can be used simultaneously. Any professional recording so...

...

Platine vinyl Pro-Ject ELEMENTAL Pro-Ject has decided to go after the cheap plastic turntable market with an high quality alternative that comes complete with an Ortofon cartridge. The new Elemental table is a real "plug'n'play" all the way. No adjustment of counterweight and antiskating is needed, because both are pre-adjusted. This new straight ultra low mass tonearm is optimised for Ortofon OM cartridge series. All the buyer needs to do is remove it from the box, remove bearing ...

Pro-Ject Battery Accu Box S2 The Pro-Ject Accu Box S2 is used for sound enhancement for devices powered by 5V / DC, such as Pro-Ject Pre S2 Digital Box, Head Box S2 or DAC Box S2 +. USB connection 1x 5V (type A plug). Battery life up to 6.5 and charging time approx. 8 hours....

...

Turntable Pro-ject Debut Carbon The first Debut turntable, introduced in the late 1990s, was a revolution for the hi-fi industry. For the first time after the arrival of Compact Disc and the sumed demise of vinyl records, an analogue product re-emerged in the “mass market” – something all music lovers could afford. The new DEBUT Carbon DC has been designed to set new standards in this category for the coming decade – perfectly timed as analogue today is again a respected s...

Pro-Ject Essential III Black lacquered + Ortofon OM10 cell CHARACTERISTICS Design MDF frame MDF tray Aluminum pulley Aluminum drive arm (8.6 inches) DC motor Silicone strap Ortofon OM10e phono cell Measures Reading speed 33.3 and 45 rpm Variation in speed: 0.70% (33.3) / 0.60% (45) Crying and flicker: 0.21% (33.3) / 0.19% (45) Reading arm Length: 8.6 inches (218.5 mm) Overhang...

Pro-Ject Essential III BT Turntable It is distinguished by the presence of a Bluetooth wireless transmitter and allows you to enjoy its wireless vinyl records with a Bluetooth headset, a Bluetooth speaker or any device with Bluetooth connectivity. On the design side this model is equipped with a new DC motor, an aluminum pulley and a new phono cable. Always compatible 33.3 and 45 rpm, the Pro-Ject Essential III BT turntable is simple to use and will delight those looking for a styl...

Pro-ject Debut Carbon Light Grey The Turntable Classic! Carbon tonearm with 2M Red and DC power supply The first Debut turntable, introduced in the late 1990s, was a revolution for the hi-fi industry. The new Debut Carbon DC was designed to set new standards in this category for the coming decade! The most obvious improvement is the inclusion of a Carbon tube for the tonearm, which increases stiffness and decreases unwanted resona...

Turntable Pro-Ject Debut Carbon Phono USB The best-buy turntable classic with carbon tonearm, computer connection and DC power supply! The first Debut turntable, introduced in the late 1990s, was a revolution for the hi-fi industry. For the first time after the arrival of Compact Disc and the assumed demise of vinyl records, an analogue product re-emerged in the “mass market” – something all music lovers could afford. The new Debut Carbon Phono USB (DC) has ...

Project Debut Carbon Lacquered white The classic turntable! Carbon tonearm with power supply + Ortofon 2M RED cell The first Debut turntable, introduced in the late 1990s, revolutionized the hi-fi industry. The new Debut Carbon DC has been designed to set new standards in this category for the next decade! The most obvious improvement is the inclusion of a carbon tube for the tonearm, which increases rigidity and decreases unwanted reson...

• Lifestyle for vinyl fans • 8,6” carbon tonearm • Heavy non resonant acrylic platter • Precision belt drive with synchronous motor • New sorbothane motor suspension • magnetic cartridge 2M red from Ortofon • 7 high-gloss colours The most-wanted audiophile design turntable with carbon tonearm! The first Debut turntable, introduced in the late 1990s, was a revolution for the hi-fi industry. For the first time after the arrival of Compact Disc and th...

Phono preamplifier Pro-Ject Tube Box DS This precision tube phono preamplifier benefits from outstanding circuit technology from Dr. Sykora and uses ultimate components. For the first time a variable selection of input impedance for MC cartridges can be done while playing a record! Other features include input capacitance for MM cartridges and switchable subsonic, that prevents your amplifier and speakers of ultra low rumble below 20Hz. All components including tube output and poly...

RPM 3 Carbon utilises evolutionary enhancements to improve the performance of RPM series: A low resonance chassis holds an inverted platter bearing with ceramic ball for further reduced rumble. An outboard 15V AC motor is smoothly driven using an ultra precision AC generator with DC power supply for further enhanced speed stability. A 10“ S-shaped tonearm tube is made from carbon fibre, aluminium and resin. Using a complex 3-step process with heat treatment and 100bar pressure, arm tube...

Classic turntable with superior tone-arm & advanced magnetic cartridge reaches magical performance levels! 1Xpression Carbon Classic is the 6th generation of the hi-fi classic Pro-Ject 1, which was presented for the first time in 1991. No other entry-level turntable concept is more audiophile and the current version includes a totally new carbon tone-arm with spin-off „EVO“-technology. It`s new innovative gimbal design features a resonance damping counterweight, that allows best perfor...

• MM & MC capable • True dual mono design • Balanced XLR & unbalanced RCA In & Outputs • Fully passive RIAA & DECCA equalisation • Unique continously variable input impedance loading, matches every cartridge (adjustment even while playing) • RCA & XLR In & Out • Superior low noise / low distortion • Classy & elegant dip switches • DC power supply (< 1 watt standby power) • Metal casing protects against vibration and interference • Faceplate si...

The Pro-Ject Amp Box RS power amplifier is a compact model with a tube input stage capable of delivering up to 2x110 Watts at 8 Ohms and 2x180 Watts at 4 Ohms. The Pro-Ject Amp Box RS power amplifier is ideal for Hi-Fi and home theater applications. It adopts a dual mono design with a SMD topology in which the signal path is shortened to the maximum. The very sophisticated construction of this power amp includes an optimized PWM circuit with a wide bandwidth and an extremely low distortio...

Turntable Pro-Ject 6perspeX Listening tests showed that metal springs and sub-chassis limit the sonic possibilities of our subchassis turntable classic Perspective. With the 6perspeX we cut our own path: The sub-chassis is made out of ´Corean´ which shows no resonances at all and this assembly is supported by magnetic power instead of metal springs providing excellent decoupling. The result was phenomenal, so we decided to combine this ultimate turntable design with our new Hig...