Pro-Ject Essential III BT White + Cell Ortofon OM10

Pro-Ject Essential III BT Turntable

It is distinguished by the presence of a Bluetooth wireless transmitter and allows you to enjoy its wireless vinyl records with a Bluetooth headset, a Bluetooth speaker or any device with Bluetooth connectivity. On the design side this model is equipped with a new DC motor, an aluminum pulley and a new phono cable. Always compatible 33.3 and 45 rpm, the Pro-Ject Essential III BT turntable is simple to use and will delight those looking for a stylish and powerful turntable.


CHARACTERISTICS

Design
MDF frame
MDF tray
Aluminum pulley
Aluminum drive arm (8.6 inches)
DC motor
Silicone strap
Ortofon OM10e phono cell
Built-in RIAA phono preamp (can be disabled)
Bluetooth controller, aptX compatible

Measures
Reading speed 33.3 and 45 rpm
Variation in speed: 0.70% (33.3) / 0.60% (45)
Crying and flicker: 0.21% (33.3) / 0.19% (45)

Reading arm
Length: 8.6 inches (218.5 mm)
Overhang: 22.0 mm
Effective mass: 8 grams
Counterweight Pro-Ject 00 (for phono cell from 3 to 5.5 grams)
Arm also compatible with counterweights Pro-Ject 01 and Pro-Ject 08 (not supplied).

Connectors
RCA stereo + GND output
An optical digital output S / PDIF

Ortofon OM10 phono cell
1/2 "Frame - Elliptical - Mobile Magnet
Output level: 4 mV (at 1000 Hz and 5 cm / second)
Channel separation: 22 dB (at 1 kHz)
Channel separation: 15 dB (at 15 kHz)
Symmetry of the channels: 2 dB (at 1 kHz)
Frequency response at -3dB: 20 ​​- 25000 Hz
Frequency response: 20 - 20,000 Hz ± 2 dB
315 Hz tracking at the specified bearing pressure: 65 μm
Lateral compliance: 25 μm / mN
Radius of curvature of the tip: r / R 8/18 μm
Amplitude of support pressures: 1.25 - 1.75 g (12.5 - 17.5 mN)
Recommended bearing pressure: 1.25 g (12.5 mN)
Cell weight: 6 g
Internal Impedance (DC DC): 750 Ohms
Internal inductance: 450 mH
Recommended load resistance: 47 kOhm
Recommended load capacity: 200 - 600 pF
Angle of tracking: 20 °

Supplied accessories
Counterweight Pro-Ject 00
45T Centraliser
Drive belt
Protective cover
Accessory for shifting
Phono cable (Pro-Ject Connect It E)
Power supply

Overview
Dimensions (W x H x D): 420 x 112 x 330 mm
Weight: 5.0 kg
Max power consumption: 4.5 Watts

9120071658267