Presonus TEMBLOR T10

Temblor is the essential companion of the Eris or Scepter speakers. Regardless of the size of the woofer, adding a subwoofer to a pair of studio monitors can relieve them and increase their accuracy in the low midrange, while benefiting from increased roundness of the bass frequencies.

With a performance of 110 dB and an adjustable crossover between 50 Hz and 130 Hz, it will fit as well on the Eris 5 as on the Scepter 8, with each time a perfect rendering. The bass becomes round, present and workable. Comes with a footswitch that allows you to bypass the Temblor, the high-pass filter and the Sub output to listen to your mixes without subwoofer, but with a full-band frequency response.

Inputs
- 2 balanced XLRs
- 2 x 6.35 mm TRS balanced jack
- 2 asymmetric RCA

Exits
- 2 balanced XLRs (wideband with 80 Hz high-pass filter option)
- 2 x 6.35 mm balanced 3-point (TRS) jack (wide band with 80 Hz high-pass filter option)
- 1 balanced XLR (sub-out for subwoofer)

Performances
- Frequency response: 20 Hz - 200 Hz
- Cutoff frequency: 50 - 130 Hz (adjustable)
- Signal-to-noise ratio:> 98 dB (A-weighting)
- DHT: 0.019% at a power <160 W
- Power of the amplifier: 250 W peak, 170 W RMS
- Power consumption: 230 W
- Amplifier type: class A / B
- Peak SPL (1 meter): 110 dB
- Woofer: 10 "fiberglass composite, facing forward
- Acoustic vent: bass-reflex open on the front

User commands
- Input gain range: -30 to +6 dB
- Polarity switch: 0 ° or 180 °
- Low pass filter control: 50 Hz to 130 Hz
- Mass switch: on / off
- High Pass Filter Switch: On / Off
- Bypass pedal: on / off

Protection
- Radio interference
- Output current limitation
- Overheating
- Power on / off transients
- Subsonic filter
- External power supply fuse

Power
- 100-120 V ~ 50/60 Hz or 220-240 V ~ 50/60 Hz

Physical characteristics
- Width: 320 mm
- Depth: 400 mm
- Height: 400 mm
- Weight: 17.9 kg