Marmitek 2 way HDMI to PLC Transmitter

The Marmitek HDTV Anywhere video transmitter allows you to use the home power grid to deliver high definition picture and sound from any source equipped with HDMI output to a TV or video projector installed in another room. It uses the CPL technology (In-Line Carrier Current).
With the Marmitek HDTV Anywhere, you can watch any HD source from the living room (cable TV, cable or satellite, DVD or Blu-ray player) in your bedroom, office or any other room room of the house without having to pull cables nor saturate your environment with radio waves. The Marmitek HDTV Anywhere allows you to connect two HD sources and send the high definition signal wirelessly to a second HDTV or to an HD projector located in another room. And you can continue to control them remotely thanks to the system of signal transfer infrared remote control. It is possible to connect the HDTV transmitter and HDTV receiver to a TV and projector to view the same content in two different rooms.
The Marmitek HDTV Anywhere video transmitter is compatible with high definition video up to 1080p Full HD resolution and also supports additional features offered by your various devices (Video on Demand, Pay TV, Electronic Program Guide, Time Shift and TV recording) that remain available and remotely controllable. Fully Plug & Play, the Marmitek HDTV Anywhere uses the existing electrical network and therefore does not require any special installation: no cable to pull or complex procedure to implement. And because the transmitter incorporates an HDMI splitter and has its own HDMI output, you can also continue to watch the connected devices locally as it simply comes in between your sources and your main TV.




Compatibility

Supported resolutions: 1080p @ 60 / 50Hz, 1080i, 720p, 576p, 480p
Supported audio format: PCM, up to 3 Mbps

Technology

Powerline: SmartLink CPL with transfer rate PHY 500 Mbps
Video compression: H.264
Latency (slowdown): <260ms
Quality of Service: Intelligent Qos for streaming video
Range: max. 300 meters with SmartLink / max. 200 meters without SmartLink

Transmitter

Input HDMI x2 (19 pin female)
HDMI output x1 (19 pin female)
IR return function (1x IR output)
Dimensions: 182 x 97 x 32 mm

Receiver

HDMI output x1 (19 pin female)
IR return function (1x IR input)
Dimensions: 182 x 97 x 32 mm
Infrared return function
Supported IR frequencies: 30 kHz - 60 kHz

Food

Mains voltage 100 ~ 240VAC @ 50 / 60Hz
Power Consumption On / Standby: 6 Watts / 4.2 Watts

What's in the Box

1x HDTV Transmitter
2x AAA Batteries
1x HDTV Receiver
1x IR Receiver Cable
1x Remote Control
1x IR blaster cable with 1 LED
2x HDMI Cables
2x Anchors + Screws
2x Power Cables
1x User's Guide