Yamaha RS-700

Yamaha RS-700
Yamaha RS-700
Yamaha RS-700
Yamaha RS-700
  • Power Amplifcateur Yamaha RS-700
  • Power Amplifcateur Yamaha RS-700
  • Power Amplifcateur Yamaha RS-700
  • Power Amplifcateur Yamaha RS-700
Yamaha RS-700
Yamaha RS-700
Yamaha RS-700
Yamaha RS-700
Yamaha
This product has been removed from our catalog
Warranty: 24 months
New

Product Information

Back to basics for Yamaha. And in the 70s, with this amplifier built in the frankly retro design. A large volume potentiometer, flanked by a smaller input selection and rotating ... rectangular and vertical buttons. Even the speaker selector was located near the headphone output. Rest assured, the Yamaha R-S700 does not come with a disco ball. This integrated amplifier is well-known, with short circuits - Digital ToP-ART technology, for preserved signal integrity - and high-quality components (low impedance, low noise, high efficiency) cooled by an extruded aluminum sink . To control the possible vibration of the chassis, Yamaha inserted a center reinforcement bar into the Yamaha R-S700. The power delivered is 2 x 100 Watts under 8 Ohms, enough to produce a high level of sound even with low-sensitivity speakers, especially as the Yamaha R-S700 can deliver up to 160 Watts per channel In peak. Yamaha has therefore not skimped on the quality of the components. Power and power reserve are therefore clearly higher than the other models in the range (R-S300 and R-S500). Yamaha has also equipped the Yamaha R-S700 with a variable loudness function - adjustable by potentiometer - that enhances the bass and treble according to the tastes of the listener and whatever the level of listening. In addition, the Yamaha R-S700 features CD Direct mode, which increases the signal-to-noise ratio of the 7-dB CD input to 107 dB! Finally, the connectivity is very complete, with no less than 6 inputs (including a phono), 3 outputs including one for subwoofer, and a connector for optional iPod docks (wired or wireless). Two pairs of speakers can be connected to silver-plated terminals. And to ensure that the Yamaha R-S700 is not missing, there is an input and output for a preamplifier, either as a power amplifier or as a preamplifier. The Yamaha R-S700 is an excellent stereo amplifier that will surprise you with its musicality and realism.

Power: 2 x 100 Watts (8 ohms 20 Hz - 20 kHz, 0.019% THD)

Features
Top-Art anti-resonance chassis
Symmetrical design
Discrete components
Pure Direct function can be activated on the front panel, allowing stereo listening without tone corrections (Signal to Noise Ratio 100 dB).
Direct CD function can be activated on the front panel, allowing stereo listening without tone correction. This function is specific to the CD input and improves the signal-to-noise ratio (107dB).
Variable loudness with flat position
Speaker Output Selector: Speaker A or B / A + B
Selectable impedance selector on the rear of the unit (LOW: A or B in 4 Ohms / A + B in 8 Ohms - HIGH: A or B in 8 Ohms / A + B in 16 Ohms)
Auto Power Off function: automatic or programmable sleep mode
(4h / 6h / 12h). Activate or deactivate directly on the back of the device with the "Power management" selector
Extremely wide legs eliminate all vibration
Screw terminals compatible with "banana plugs"
Aluminum front and remote control
AM / FM tuner with RDS function and preset (3 μV - 20.8 dBf)
40 memorable stations

Measures
Impedance of the phono input: 3 mV / 47 kOhms
Impedance of the CD input: 200 mV / 47 kOhms
Output impedance REC OUT: 200 mV / 1 kOhms
Frequency response 10 Hz - 100 kHz ± 1dB (CD, Pure Direct enabled)
Phono harmonic distortion (20 Hz - 20 kHz): 0.025%
CD harmonic distortion (20 Hz - 20 kHz): 0.015% (50 Watts / 8 Ohms)
Signal to noise ratio Tuner 74dB / 70dB (Mono / Phono)
Signal to noise ratio phono: 88 dB
Signal-to-Noise Ratio CD: 100 dB (Pure Direct On)
Volume adjustment range: - 89.5 dB to + 16.5 dB
Standby Power Consumption: 0.5 Watt

Connectors
1 phono input compatible with vinyl turntables (MM cell)
1 CD input (RCA)
1 input with completely separate power supply for iPod / iPhone docking stations (YDS-12 or YID-W10) or Bluetooth (YBA-10)
1 FM antenna socket
1 AM antenna connection
3 AUX RCA inputs (LINE)
2 AUX REC (RCA) outputs Line 2 & 3
1 subwoofer output
1 Pre-OUT output
1 composite video output for iPod and iPhone (requires optional station to be implemented)
1 front headphone output (1/4 "jack)

General information
Dimensions (W x H x D): 435 x 151 x 387 mm
Net weight: 14 kg