Lindy Extender kit and HDMI Distribution System via Ethernet

Technical characteristics

HDMI distribution solution for malls or video presentations
 
Function
The Extender transmits HDMI signals with HDCP and digital audio in full 1080p resolution and slightly compressed form
Routes 1: n and n: n can not be achieved only through an Ethernet network. A dedicated Ethernet network must be used in this case or an isolated VLAN segment for each Transmitter.
 
Getting HDMI load
Supports HDTV resolutions up to Full HD 1080p and 8 Bit, aves HDCP
3D is not supported
stereo audio support 2 channel
Transmitter with HDMI input
Receiver with HDMI Output
 
Supports Ethernet support
Transmitter and Receiver with RJ45 port, 100BaseT interface
Transmitter and Receiver are configurable via a Web interface, using several Receiver and Transmitter IP addresses must be configured
The devices used networks must support the protocols Broadcast, if any binding is not established and fault-free operation is not guaranteed.
Note: some ancient generation network equipment do not implement the Broadcast protocol correctly, the link does not work in this case
Wi-Fi routers used in residential networks do not support in general the required protocol!
 
Supports IR remote controls
Also transmits the IR remote control signals (38kHz ***, 940nm)
IR sensor cable to connect to the Receiver
IR emitter cable to connect the Transmitter
 
Camera specifications
metal housing
LED Power and Status (power and status)
Dimensions 9.5 x 10.5 x 2.5 cm for Transmitter or Receiver
Weight 0.3kg for Transmitter or Receiver, total weight 0.5kg with packing
 
Scope of delivery
Transmitter and Receiver
IR cable TX or RX
Universal Alimentatin 100 ... 240VAC / 5VDC ~ 1A adapter with Euro area, US, UK and AUS
Multi language manual