Lindy Kit extender HDMI Classic 1080p (Lindy38137)

HDMI Classic 1080p extender kit - via Ethernet or 1: 1 connection on RJ45 cable up to 120m Lindy 38137

This HDMI extender supports transmission in "1-to-1" or "1-to-many" modes.
Ideal for signal distribution in Digital Signage or video presentations.
 
Kit 1x Transmitter and 1x Receiver, compatible with HDMI Full HD 1080p and HDCP *
The IR transmitter and receiver cables transmit infrared remote control signals and thus allow remote control of the source signal from the display (receiver side)
The connection between transmitter and receiver can be done directly in 1: 1 mode via a Cat.5e / 6 RJ45 cable up to 100m or via a dedicated Ethernet UPnP Fast Ethernet (1: 1 and 1: n) on Up to 4 levels
Simple to connect, simply connect the transmitter (Transmitter) with an HDMI cable to the receiver (Receiver) on the screen or projector and connect the two units with the RJ45 cable
See the Technical Details for more information about Ethernet network recommendations
Additional Receivers are available as part no. 38138


Specifications:

functions
The extender transmits HDMI signals with HDCP and digital audio in full 1080p resolution and in slight compression, barely noticeable in video mode
For still images of MJPEG compression artifacts are identifiable
Transmitter and Receiver can be connected in 1: 1 mode via Cat.5e / 6 RJ45 cable up to 120m or via a Fast Ethernet network on up to 4 levels.
The Ethernet network must be isolated via VLAN and must not have other network devices. UPnP is used, no IP address is assigned
1: n links can only be realized via Ethernet network, n: n systems can be realized via several separate networks with one transmitter for each.
Additional receivers are available under Art. 38138
 
HDMI Support
Supports HDTV resolutions with HDCP: Full HD 1080i / p @ 50 / 60Hz, 720p @ 50 / 60Hz, 576i / p @ 50Hz or 480i / p @ 60Hz
3D is not supported
Support for audio transmission 2-channel stereo
Transmitter (transmitter) with HDMI input
Receiver (receiver) with HDMI output
 
Ethernet support
Transmitter and Receiver with RJ45 female port and 100BaseT interface
The network components used must support the UPnP protocol.
Note: An isolated Ethernet network is required to implement this system
 
Specifications
Metal enclosures
Dimensions of each unit: 10 x 6 x 2.6 cm
Weight of each unit: 0,2kg, total weight with packaging: 0,75kg
 
Scope of delivery
1x Transmitter and 1x Receiver
Receiver IR receiver cable, with adhesive for attachment
IR emitter cable for Transmitter, with adhesive for fixing
2x universal power supplies 100 ... 240VAC / 5VDC, with mains adapters Euro, US, UK and AUS
Multilingual manual