Bose Pro PowerShare PS602

BOSE
PowerShare PS602
adaptable power amplifier

Designed for a wide range of applications,
including:
• Performing arts venues
• Houses of worship
• Conference centers
• Retail stores
• Restaurants and bars
• Hospitality venues



Product Description :
Bose PowerShare PS602 adaptable power amplifier delivers 600 watts for fixedinstall
applications. Through patented technology, total amplifier power is shared
across all output channels, allowing installers the freedom to utilize power where
needed. With support for both low- and high-impedance loads up to 100V,
PowerShare amplifiers adapt to a wide range of applications. Onboard
configurable loudspeaker processing and direct access to zone controllers
eliminate the need for an additional signal processor in many installations, while
outstanding audio performance and reliability are assured with patented
technologies inherited from the field-proven PowerMatch® line. This unique set
of features and technologies makes PowerShare one of the most versatile highperformance
amplifiers available.

Key Features :
• PowerShare Technology – Patented PowerShare technology allows the total
600 watts of power to be shared asymmetrically across all outputs, as each
output is capable of delivering full power. Instead of selecting amplifier power
based on the needs of the largest zone, installers now have the freedom to
use total amplifier power in the application. This enables more flexibility during
the initial design, or later on-site when making unplanned changes that take
advantage of surplus power.
• Load-Independent Outputs – Each channel can be configured for lowimpedance
(4-8 Ω) or high-impedance (70/100V) applications without bridging,
use of jumpers, or software settings.
• DFL™ System – The Dual Feedback Loop system, inherited from the fieldproven
Bose PowerMatch® amplifier line, improves performance and reliability
through continuous monitoring and control of both the current and voltage
delivered to each output load. This combination provides improved linearity
and lower distortion, while protecting loudspeakers.
• Integrated Loudspeaker Processing with Optional PowerShare Editor
Configuration – For applications requiring additional signal processing the
PowerShare Editor Software offers real-time selection and control of Bose
loudspeaker EQs, 9-band PEQs, standard mixing, crossover, delay, and mute/
output polarity through a USB connection. For basic setups without a PC,
rear-panel settings allow installers to recall Bose loudspeaker equalization
and protection per output channel. These features eliminate the need for an
external signal processor in many applications.
• ControlCenter Zone Controller Accessories – Bose ControlCenter CC-1
zone controllers can be directly attached for remote adjustment of amplifier
outputs further extending stand-alone amplifier applications.

• Auto-Standby – Designed to save power
consumption when not in use. PowerShare
amplifiers can be configured to automatically
enter standby mode when the audio signal falls
below a set threshold, then wake when audio
returns.


Technical Specifications
Power Rating
Amplifier Power 2 x 300 W (THD+N < 0.04%, 1 kHz, 4-8 Ω, 70/100V)
Maximum Power per Channel 600 W @ 4-8 Ω, 70/100V
Gain (Low-Z mode) 44 dB, RCA (unbalanced) inputs; 32 dB, Euroblock (balanced) inputs
Gain (70V mode) 47 dB, RCA (unbalanced) inputs; 35 dB, Euroblock (balanced) inputs
Gain (100V mode) 50 dB, RCA (unbalanced) inputs; 38 dB, Euroblock (balanced) inputs
Audio Performance
Frequency Response 4-8 Ω: 20 Hz – 20 kHz (+/- 0.5 dB @ 1 W)
70/100V: Same as 4-8 Ω with 50 Hz high-pass filter
Channel Separation (Crosstalk) > 85 dB @ 1 kHz, > 65 dB @ 20 kHz
Signal to Noise Ratio 100 dB (at rated power, A-weighted)
Audio Inputs
Input Channels 2 unbalanced, 2 balanced
Connectors Stereo RCA, 3-pin Euroblock
Input Impedance 10 kΩ (RCA), 20 kΩ (Euroblock)
Maximum Input Level 20 dBu (at 12 dBu sensitivity setting)
Sensitivity -10 / -2 dBV, RCA inputs; 4 / 12 dBu, Euroblock inputs (low / high sensitivity)
Audio Outputs
Outputs 2
Connectors 2-pin inverted Euroblock
Integrated DSP
A/D and D/A Converters 24-bit / 48 kHz
Processing Functions Standard mixer, loudspeaker EQ, 9-band PEQ, Vpeak/Vrms limiters, delay, band pass, mute/output polarity inversion
Loudspeaker Presets Flat, DS16, DS40, DS100, FS3B, 402, 802, MA12EX, RMU105 and RMU108
Audio Latency 1 ms (any input to speaker output)
Indicators and Controls
Power LED Solid green: Power is on. Blinking green: Unit is in standby mode. Solid amber: Thermal fault. Solid red: Supply fault.
Input Signal LED Green: Signal present. Amber: Input is near clipping. Red: Input is clipping. Solid red: Indicates a fault.
Output Limit LED Amber: Amplifier limiting an output. Blinking red: Amplifier muted. Solid red: Indicates a fault.
Controls, Front Panel Power On/Off
Controls, Rear Panel Amplifier mode DIP switches, loudspeaker EQ dials, output attenuators
Electrical
Mains Voltage 100 VAC – 240 VAC (±10%, 50/60 Hz)
AC Power Consumption 120 VAC: 79 W (Standby), 124 W (Max) 230 VAC: 88 W (Standby), 184 W (Max)
Mains Connector Standard IEC (C14)
Maximum Inrush Current 14.14 A (230 VAC / 50 Hz), 8.04 A (120 VAC / 60 Hz)
Protections High temperature, output short, extra high frequency (EHF), excessively low or high AC line voltage
Physical
Dimensions (H x W x D) 44 mm x 483 mm x 414 mm (1.7” x 19.0” x 16.3”)
Shipping Weight 6.9 kg (15.3 lb)
Net Weight 5.5 kg (12.2 lb)
Cooling System Microprocessor controlled, variable speed fans, left to right air flow
General
Inputs (Control) RJ-45 remote input for volume control using the CC-1 ControlCenter zone controllers, or for connection to the CV41. USB input for
configuring the amplifier with PowerShare Editor software. Mute input control.

Sorry no reviews available in your language.